Categoria Rural -Trapp

ES 550G (TRAPP Engine)

kweb_master — Tue, 01 Oct 2024 17:28:37 +0000

Equipped with TRAPP motors (Lifan), powered by regular gas (without additives).
Lubricant: SAE 20W50 Oil – First change after the first 5 hours of operation and every 50 operating hours thereafter, with air filter maintenance.
Cutting size: 4, 6, 8 and 12mm.
Cutting length adjustment ratio: Adjust the belt to the appropriate position for the desired cutting length.
Body built of 6.35-mm-thick sheet metal.
Gearbox lubrication: First change after the first 50 hours of operation and every 300 hours thereafter. Use 700 ml of SAE 140 oil.
Ration outlet device with jet direction adjustment and 360° rotation.
Finish: Anti-corrosion treatment on all parts subject to oxidation and painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.
Warranty: 24 months (3 months legal warranty, 9 months special TRAPP warranty, 12 subsequent months – excluding the motor – special TRAPP warranty).

Application
Cutting grass, sorghum, sugarcane, and shredding palm fronds, coconut palm leaves, fibrous materials, among others, for cattle, horses, boars, emus, ostriches, at the right size for each type of herd, in uniform pieces.

O post ES 550G (TRAPP Engine) apareceu primeiro em Trapp.

ES 550

kweb_master — Tue, 01 Oct 2024 17:28:37 +0000

Cutting size: 4, 6, 8 and 12mm.
Cutting length adjustment ratio: Adjust the belt to the appropriate position for the desired cutting length.
Body built of 6.35-mm-thick sheet metal.
Gearbox lubrication: First change after the first 50 hours of operation and every 300 hours thereafter. Use 700 ml of SAE 140 oil.
Ration outlet device with jet direction adjustment and 360° rotation.
Finish: Anti-corrosion treatment on all parts subject to oxidation and painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.
Warranty: 24 months (3 months legal warranty, 9 months special TRAPP warranty, 12 subsequent months – excluding the motor – special TRAPP warranty).

Application
Cutting grass, sorghum, sugarcane, among others, for cattle, boars, emus, ostriches, at the right size for each type of herd, in uniform pieces. In addition to shredding palm fronds, coconut palm leaves and fibrous materials.

O post ES 550 apareceu primeiro em Trapp.

ES 650

kweb_master — Tue, 01 Oct 2024 17:28:36 +0000

Tamanho de corte: 4, 6, 8 e 12 mm.
Relação para regulagem do comprimento de corte: Ajuste a correia na posição adequada ao comprimento de corte desejado.
Corpo construído com chapa de 6,35 mm de espessura.
Bica de saída com regulagem de direcionamento do jato e giro de 360°.
Lubrificação da caixa de redução: Faça a 1ª troca após as primeiras 50 horas de trabalho e as próximas a cada 300 horas. Utilize 700 ml do óleo SAE 140.
Acabamento: Tratamento anticorrosivo em todas as peças sujeitas a oxidação e pintura com tinta a pó de poliéster polimerizado em estufa a 220 °C, garantindo maior durabilidade e acabamento.
Garantia: 24 meses (3 meses garantia legal, 9 meses garantia especial TRAPP, 12 meses seguintes – excluindo o motor – garantia especial TRAPP).

Aplicação
Cortar capim, sorgo, cana-de-açúcar e triturar folhas de palmeira, coqueiro, materiais fibrosos, entre outros, para gado, cavalos, javalis, emas, avestruzes, na medida certa para cada tipo de rebanho, em pedaços uniformes.

O post ES 650 apareceu primeiro em Trapp.

ES 650G (TRAPP Engine)

kweb_master — Tue, 01 Oct 2024 17:28:34 +0000

Equipped with TRAPP motors (Lifan), powered by regular gas (without additives).
Lubricant: SAE 20W50 Oil – First change after the first 5 hours of operation and every 50 operating hours thereafter, with air filter maintenance.
Cutting size: 5 and 10 mm.
Cutting length adjustment ratio: Adjust the belt to the appropriate position for the desired cutting length.
Body built of 6.35-mm-thick sheet metal.
Gearbox lubrication: First change after the first 50 hours of operation and every 300 hours thereafter. Use 700 ml of SAE 140 oil.
Ration outlet device with jet direction adjustment and 360° rotation.
Finish: Anti-corrosion treatment on all parts subject to oxidation and painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.
Warranty: 24 months (3 months legal warranty, 9 months special TRAPP warranty, 12 subsequent months – excluding the motor – special TRAPP warranty).

O post ES 650G (TRAPP Engine) apareceu primeiro em Trapp.

TRF 80F

kweb_master — Tue, 01 Oct 2024 17:28:33 +0000

Direct motor coupling.
Body constructed with 4.25 mm thick steel plate.
Cutting blades (knives) made of special steel.
Voltage: 127 or 220 V.
Includes: 1 grain funnel (13-liter capacity), 4 sieves (3 fixed in the box: 3, 5, 12 mm, and 1 smooth “0” sieve in the shredder). Supplied with some items disassembled.
Finish: All metal parts receive anti-corrosion treatment and are painted with polymerized polyester powder at 220°C, ensuring greater durability and a high-quality finish.
Warranty: 12 months (3 months legal warranty, 9 months TRAPP special warranty).

Application:
Cuts and shreds forage, grinds seeds and cereal husks, shelled corn, sugarcane, cassava stems up to 10 mm, grasses, and more.

O post TRF 80F apareceu primeiro em Trapp.

DM 50G (Motor TRAPP)

kweb_master — Tue, 01 Oct 2024 17:27:04 +0000

Compact equipment that can be installed next to silos and warehouses.
Equipped with TRAPP motors (Lifan), powered by regular gas (without additives).
Lubricant: SAE 20W50 Oil – First change after the first 5 hours of operation and every 50 operating hours thereafter, with air filter maintenance.
Finish: Anti-corrosion treatment on all parts subject to oxidation and painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.
Comes with 1 belt, 1 manual kit, 1 feed funnel and 1 motor pulley.
Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).

Application:
Shucking ears of corn with high speed and efficiency, separating the kernels from the chaff and corncob.

O post DM 50G (Motor TRAPP) apareceu primeiro em Trapp.

DM 50

kweb_master — Tue, 01 Oct 2024 17:27:03 +0000

Compact equipment that can be installed next to silos and warehouses.
High performance and low energy consumption.
Two-pole switch in one-phase models and three-pole in three-phase models, which allows full isolation regardless of the position of the plug in the outlet.
Voltage: Motors equipped with voltage selector for 127/220 V only (makes it easier to switch voltage, providing greater convenience for the operator and lower stock at the dealer).
Comes with 1 belt, 1 manual kit, 1 feed funnel and 1 motor pulley.
Finish: Anti-corrosion treatment on all parts subject to oxidation and painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.
Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).

Application:
Shucking ears of corn with high speed and efficiency, separating the kernels from the chaff and corncob.

O post DM 50 apareceu primeiro em Trapp.

JK 700G (Motor TRAPP)

kweb_master — Tue, 01 Oct 2024 17:26:08 +0000

The shredder has 2 cutting sizes to meet the specific needs of each herd.
The smaller cutting size is suitable for preparing feed for goat and sheep herds.
In this case, the equipment operates with 2 cutting systems, with 2 horizontal blades and 8 vertical blades.
The larger cutting size is ideal for preparing feed for cattle herds, in which case the vertical blades need to be removed by loosening the mounting screws.
Belt drive power transmission.
Body built of 4.25-mm-thick sheet metal.
Cutting blades made of special steel.
Motor maintenance: First change after the first 5 hours of operation and every 25 operating hours thereafter, with air filter maintenance.
Comes with: 1 grain funnel (13-liter capacity), 5 screens (4 fixed in the box and 1 “O” smooth screen inside the shredder) and 1 manual kit.
Finish: Anti-corrosion treatment on all parts subject to oxidation and painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.
Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).

Application:
Indicated for the same application, with the advantage of chopping grass, sorghum, manioc and other leguminous forage, in addition to grinding corn with straw and ear, making porridge and cornmeal.

O post JK 700G (Motor TRAPP) apareceu primeiro em Trapp.

JK 700

kweb_master — Tue, 01 Oct 2024 17:26:07 +0000

The shredder has 2 cutting sizes to meet the specific needs of each herd.
The smaller cutting size is suitable for preparing feed for goat and sheep herds.
In this case, the equipment operates with 2 cutting systems, with 2 horizontal blades and 8 vertical blades.
The larger cutting size is ideal for preparing feed for cattle herds, in which case the vertical blades need to be removed by loosening the mounting screws.
Belt drive power transmission.
Body built of 4.25-mm-thick sheet metal.
Cutting blades made of special steel.
Two-pole switch that allows full isolation regardless of the position of the plug in the outlet.
Comes with: 1 grain funnel (13-liter capacity), 5 screens (4 fixed in the box and 1 “O” smooth screen inside the shredder) and 1 manual kit.
For motels without motor, it also includes: 1 pulley and 2 belts.
Finish: Anti-corrosion treatment on all parts subject to oxidation and painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.
Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).

O post JK 700 apareceu primeiro em Trapp.

JK 500

kweb_master — Tue, 01 Oct 2024 17:26:06 +0000

The shredder has 2 cutting sizes to meet the specific needs of each herd.
The smaller cutting size is suitable for preparing feed for goat and sheep herds.
In this case, the equipment operates with 2 cutting systems, with 2 horizontal blades and 8 vertical blades.
The larger cutting size is ideal for preparing feed for cattle herds, in which case the vertical blades need to be removed by loosening the mounting screws.
Belt drive power transmission.
Body built of 4.25-mm-thick sheet metal.
Cutting blades made of special steel.
Two-pole switch that allows full isolation regardless of the position of the plug in the outlet.
Comes with: 4 pads and 1 manual kit.
For motels without motor, it also includes:
1 pulley and 2 belts.
Finish: Anti-corrosion treatment on all parts subject to oxidation and painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.
Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).
Indicated for the preparation of animal feed supplement.

Application:
It cuts palm (cactus), manioc branches, banana stems, sugarcane, macambira bromelia, “horse” forage watermelon, agave potatorum and other forages.

O post JK 500 apareceu primeiro em Trapp.