The TH 750 is a 4-in-1 lawn mower, offering four modes of use to guarantee the best finish for your lawn:

Grass collector – 65 liters: The large collection bag allows for storing a high volume of cut grass, keeping your lawn clean and reducing the need for frequent stops to empty the bag.

Side discharge: Ideal for fast mowing in large areas, this function ejects the cut grass directly from the side of the mower, making work on wide terrains easier.

Mulching system: The TH 750’s mulching blade provides a clean and eco-friendly cut, reducing the need for grass collection and contributing to a healthier lawn.

Self-propelled (front-wheel drive): The drive system reduces operator effort, making mowing lighter and more comfortable.

O post TH 750 apareceu primeiro em Trapp.

Using gas-powered lawn mowers makes mowing the lawn more convenient, without the hassle of extension cords and electrical outlets.

Equipped with an automatic brake system for greater safety, induction ignition, manual retractable starter with decompressor, automatic speed control and low noise index.

The size of the rear wheels facilitates the mower’s mobility on any type of terrain.

Drive system:

Equipped with an exclusive traction system on the front wheels, helping to move and drive the mower forward at a speed of 4.2 km/h. Thermoplastic wheels with sintered bushings.

Size of wheels: front: 203 mm (8”), rear: 305 mm (12”).

Restricted for use in hilly terrain (maximum slope of 15°) and eventual maneuvers up to 30°.

Ergonomic handle for greater operator comfort, foldable for easy transport and storage.

Base made of 1.9-mm-thick steel sheet metal.

Equipped with TRAPP motor (Lifan), powered by regular gasoline (without additives).

Fuel consumption: approximately 1 l/h. Lubricant: SAE 20W50 Oil – First change after the first 5 hours of operation and every 50 operating hours thereafter.

Air filter: Clean every 25 operating hours or annually.

Replace every 50 hours or annually.

Special steel blade, 3 mm thick, with induction tempering on the cutting edge.

9 cutting height adjustment positions, ranging from 2.8 to 8.9 cm (individual height adjustment system on all 4 wheels).

Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.

Approximate yield: 1,000 m²/h.

Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).

O post LF 65S apareceu primeiro em Trapp.

Using gas-powered lawn mowers makes mowing the lawn more convenient, without the hassle of extension cords and electrical outlets.

Equipped with an automatic brake system for greater safety, induction ignition, manual retractable starter with decompressor, automatic speed control and low noise index.

The size of the rear wheels facilitates the mower’s mobility on any type of terrain.

Drive system:

Equipped with an exclusive traction system on the front wheels, helping to move and drive the mower forward at a speed of 4.2 km/h. Thermoplastic wheels with sintered bushings.

Size of wheels: front: 203 mm (8”), rear: 305 mm (12”).

Restricted for use in hilly terrain (maximum slope of 15°) and eventual maneuvers up to 30°.

Ergonomic handle for greater operator comfort, foldable for easy transport and storage.

Base made of 1.9-mm-thick steel sheet metal.

Equipped with TRAPP motor (Lifan), powered by regular gasoline (without additives).

Fuel consumption: approximately 1 l/h. Lubricant: SAE 20W50 Oil – First change after the first 5 hours of operation and every 50 operating hours thereafter.

Air filter: Clean every 25 operating hours or annually.

Replace every 50 hours or annually.

Special steel blade, 3 mm thick, with induction tempering on the cutting edge.

9 cutting height adjustment positions, ranging from 2.8 to 8.9 cm (individual height adjustment system on all 4 wheels).

Finish:

All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.

Approximate yield: 1,000 m²/h.

Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).

Transmission housing – 6 months (3 months legal warranty, 3 months special TRAPP warranty).

O post LF 55RC apareceu primeiro em Trapp.

Using gas-powered lawn mowers makes mowing the lawn more convenient, without the hassle of extension cords and electrical outlets.

Equipped with an automatic brake system for greater safety, induction ignition, manual retractable starter with decompressor, automatic speed control and low noise index.

The size of the rear wheels facilitates the mobility of mowers on any type of terrain.

Thermoplastic wheels with sintered bushing.

Size of wheels: front: 203 mm (8”), rear: 305 mm (12”).

Restricted for use in hilly terrain (maximum slope of 15°) and eventual maneuvers up to 30° for 6.5-hp motors.

Ergonomic handle for greater operator comfort, foldable for easy transport and storage.

Base made of 1.9-mm-thick steel sheet metal.

Equipped with TRAPP motor (Lifan), powered by regular gasoline (without additives).

Fuel consumption: approximately 1 l/h.

Lubricant: SAE 20W50 Oil – First change after the first 5 hours of operation and every 50 operating hours thereafter.

Air filter: Clean every 25 operating hours or annually.

Replace every 50 hours or annually.

Special steel blade, 3 mm thick, with induction tempering on the cutting edge.

9 cutting height adjustment positions, ranging from 2.8 to 8.9 cm (individual height adjustment system on all 4 wheels).

Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.

Approximate yield: 1,000 m²/h.

Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).

O post LF 65WT apareceu primeiro em Trapp.

Using gas-powered lawn mowers makes mowing the lawn more convenient, without the hassle of extension cords and electrical outlets.

Equipped with manual choke and fuel valve to make it easier to start the motor.

It has a plug to facilitate draining oil from the crankcase, manual throttle control and low vibration and noise index.

The size of the rear wheels facilitates the mobility of mowers on any type of terrain.

Drive system:

Equipped with an exclusive traction system on the front wheels, helping to move and drive the mower forward at a speed of 4.2 km/h. Thermoplastic wheels with sintered bushings.

Size of wheels: front: 203 mm (8”), rear: 305 mm (12”).

Restricted for use in hilly terrain (maximum slope of 15°) and eventual maneuvers up to 30° for 6.5-hp motors.

Ergonomic handle for greater operator comfort, foldable for easy transport and storage.

Base made of 1.9-mm-thick steel sheet metal.

Equipped with TRAPP motor (Lifan), powered by regular gas (without additives).

Fuel consumption: approximately 1 l/h. Lubricant: SAE 20W50 Oil – First change after the first 5 hours of operation and every 50 operating hours thereafter.

Air filter: Clean every 25 operating hours or annually.

Replace every 50 hours or annually.

Blade: Made of special 3-mm-thick steel, with induction tempering of the cutting edge.

Cutting height adjustment: 9 positions, ranging from 2.8 to 8.9 cm (individual height adjustment system on all 4 wheels).
Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.

Approximate yield: 1,000 m²/h.

Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).

Transmission housing – 6 months (3 months legal warranty, 3 months special TRAPP warranty).

O post LF 55C apareceu primeiro em Trapp.

Using gas-powered lawn mowers makes mowing the lawn more convenient, without the hassle of extension cords and electrical outlets.

Equipped with manual choke and fuel valve to make it easier to start the motor.

It has a plug to facilitate draining oil from the crankcase, manual throttle control and low vibration and noise index.

The size of the rear wheels facilitates the mobility of mowers on any type of terrain.

Thermoplastic wheels with sintered bushing.

Size of wheels: front: 203 mm (8”), rear: 305 mm (12”).

Restricted for use in hilly terrain (maximum slope of 15°) and eventual maneuvers up to 30°.

Ergonomic handle for greater operator comfort, foldable for easy transport and storage.

Base made of 1.9-mm-thick steel sheet metal.

Equipped with TRAPP motor (Lifan), powered by regular gas (without additives).

Fuel consumption: approximately 1 l/h.

Lubricant: SAE 20W50 Oil – First change after the first 5 hours of operation and every 50 operating hours thereafter.

Air filter: Clean every 25 operating hours or annually.

Replace every 50 hours or annually.

Blade: Made of special 3-mm-thick steel, with induction tempering of the cutting edge.

Cutting height adjustment: 9 positions, ranging from 2.8 to 8.9 cm (individual height adjustment system on all 4 wheels).

Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.

Approximate yield: 800 m²/h.

Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).

O post LF 650RM apareceu primeiro em Trapp.

Using gas-powered lawn mowers makes mowing the lawn more convenient, without the hassle of extension cords and electrical outlets.

Equipped with manual choke and fuel valve to make it easier to start the motor.

It has a plug to facilitate draining oil from the crankcase, manual throttle control and low vibration and noise index.

The size of the rear wheels facilitates the mobility of mowers on any type of terrain.

Thermoplastic wheels with sintered bushing.

Size of wheels: front: 203 mm (8”), rear: 305 mm (12”).

Restricted for use in hilly terrain (maximum slope of 15°) and eventual maneuvers up to 30°.

Ergonomic handle for greater operator comfort, foldable for easy transport and storage.

Base made of 1.9-mm-thick steel sheet metal.

Equipped with TRAPP motor (Lifan), powered by regular gas (without additives).

Fuel consumption: approximately 1 l/h.

Lubricant: SAE 20W50 Oil – First change after the first 5 hours of operation and every 50 operating hours thereafter.

Air filter: Clean every 25 operating hours or annually.

Replace every 50 hours or annually.

Blade: Made of special 3-mm-thick steel, with induction tempering of the cutting edge.

Cutting height adjustment: 9 positions, ranging from 2.8 to 8.9 cm (individual height adjustment system on all 4 wheels).

Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.

Approximate yield: 800 m²/h.

Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).

O post LF 600RM apareceu primeiro em Trapp.

Using gas-powered lawn mowers makes mowing the lawn more convenient, without the hassle of extension cords and electrical outlets.

Equipped with manual choke and fuel valve to make it easier to start the motor.

It has a plug to facilitate draining oil from the crankcase.

The size of the rear wheels facilitates the mobility of mowers on any type of terrain.

Thermoplastic wheels with sintered bushing.

Size of wheels: front: 203 mm (8”), rear: 305 mm (12”).

Restricted for use in hilly terrain (15° maximum slope).

Ergonomic handle for greater operator comfort, foldable for easy transport and storage.

Base made of 1.9-mm-thick steel sheet metal.

Equipped with TRAPP motor (Lifan), powered by regular gas (without additives).

Fuel consumption: Approximately 1 l/h.

Lubricant: SAE 20W50 Oil – First change after the first 5 hours of operation and every 50 operating hours thereafter.

Air filter: Clean every 25 operating hours or annually.

Replace every 50 hours or annually.

Blade: Made of special 3-mm-thick steel, with induction tempering of the cutting edge.

Cutting height adjustment: 9 positions, ranging from 2.8 to 8.9 cm (individual height adjustment system on all 4 wheels).

Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.

Approximate yield: 800 m²/h.

Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).

O post LF 90RM apareceu primeiro em Trapp.

Using gas-powered lawn mowers makes mowing the lawn more convenient, without the hassle of extension cords and electrical outlets.

Equipped with manual choke and fuel valve to make it easier to start the motor.

It has a plug to facilitate draining oil from the crankcase.

The size of the rear wheels facilitates the mobility of mowers on any type of terrain.

Thermoplastic wheels with sintered bushing.

Size of wheels: front: 203 mm (8”), rear: 305 mm (12”).

Restricted for use in hilly terrain (15° maximum slope).

Ergonomic handle for greater operator comfort, foldable for easy transport and storage.

Base made of 1.9-mm-thick steel sheet metal.

Equipped with TRAPP motor (Lifan), powered by regular gas (without additives).

Fuel consumption: Approximately 1 l/h.

Lubricant: SAE 20W50 Oil – First change after the first 5 hours of operation and every 50 operating hours thereafter.

Air filter: Clean every 25 operating hours or annually.

Replace every 50 hours or annually.

Blade: Made of special 3-mm-thick steel, with induction tempering of the cutting edge.

Cutting height adjustment: 9 positions, ranging from 2.8 to 8.9 cm (individual height adjustment system on all 4 wheels).

Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.

Approximate yield: 800 m²/h.

Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).

O post LF 80RM apareceu primeiro em Trapp.

Using gas-powered lawn mowers makes mowing the lawn more convenient, without the hassle of extension cords and electrical outlets.

Equipped with manual choke and fuel valve to make it easier to start the motor.

It has a plug to facilitate draining oil from the crankcase, manual throttle control and low vibration and noise index.

Restricted for use in hilly terrain (maximum slope of 15°) and eventual maneuvers up to 30°.

Ergonomic handle for greater operator comfort, foldable for easy transport and storage.

Base made of 1.9-mm-thick steel sheet metal.

High-density polyethylene wheels, covered with PVC tires.

Equipped with TRAPP motor (Lifan), powered by regular gas (without additives).

Fuel consumption: approximately 1 l/h.

Lubricant: SAE 20W50 Oil – First change after the first 5 hours of operation and every 50 operating hours thereafter.

Air filter: Clean every 25 operating hours or annually.

Replace every 50 hours or annually.

Blade: Made of special 3-mm-thick steel, with induction tempering of the cutting edge.

Height adjustment: 5 positions, ranging from 2.5 to 7 cm (individual height adjustment system on all 4 wheels).

Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.

Approximate yield: 800 m²/h.

Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).

O post LF 650G apareceu primeiro em Trapp.