CG-40E


FEATURES AND DIFFERENTIALS

Recommended for residential gardens of approximately 600 m².

Equipped with a safety lock button that prevents accidental machine starting, only releasing the engine for starting when pressed.

Two-pole electrical switch that allows full isolation regardless of the position of the plug in the outlet.

Ergonomic handle for greater operator comfort, foldable for easy transport and storage.

Lock for electrical extension.

High-density polyethylene wheels, covered with PVC.
2-pole, one-phase induction motors installed in a high-density polyethylene enclosure (for protection against electrical discharges).

Base: Made of 1.5-mm-thick steel sheet metal.

Blade: Made of special steel, 3 mm thick, with induction tempered cutting edge, secured to the motor through parts made of high-strength nylon, obtaining total isolation against electric shocks.

Cutting height adjustment: 3 positions, ranging from 3.26 to 7.8 cm (height adjustment system per axle, on the 2 front wheels and 2 rear wheels).

Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.

Approximate yield: 600 m²/h.

Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).

DATA SHEET

Output (W): 1,800
Frequency (Hz): 60
Voltage (V): 127 or 220
Motor: One-phase
Net weight (kg): 20.66 / 20.85
Cutting range: 40cm
Bagger: Side outlet

DOWNLOAD THE MANUAL

CG-40E

Onde comprar

FEATURES AND DIFFERENTIALS

Recommended for residential gardens of approximately 600 m².

Equipped with a safety lock button that prevents accidental machine starting, only releasing the engine for starting when pressed.

Two-pole electrical switch that allows full isolation regardless of the position of the plug in the outlet.

Ergonomic handle for greater operator comfort, foldable for easy transport and storage.

Lock for electrical extension.

High-density polyethylene wheels, covered with PVC.
2-pole, one-phase induction motors installed in a high-density polyethylene enclosure (for protection against electrical discharges).

Base: Made of 1.5-mm-thick steel sheet metal.

Blade: Made of special steel, 3 mm thick, with induction tempered cutting edge, secured to the motor through parts made of high-strength nylon, obtaining total isolation against electric shocks.

Cutting height adjustment: 3 positions, ranging from 3.26 to 7.8 cm (height adjustment system per axle, on the 2 front wheels and 2 rear wheels).

Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.

Approximate yield: 600 m²/h.

Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).

FICHA TÉCNICA

Potência (W): 1.800
Frequência (Hz): 60
Tensão (V): 127 ou 220
Motor: Mono
Peso líquido (Kg): 20,660 / 20,850
Faixa de corte: 40 cm
Recolhedor: Saída lateral

 

You may also need

ES-650G

Eisiling machine chopper

Read More

TR-2000

Branch and Waste Shredder

Read More

TR-1500

Branch and Waste Shredder

Read More

Check out other models

ES-550G

Eisiling machine chopper

Read More

ES-550

Eisiling machine chopper

Read More

ES-650

Silage Choppers

Read More