KM-400


FEATURES AND DIFFERENTIALS

Recommended for residential gardens of approximately 500 m².

Equipped with a safety lock button that prevents accidental machine starting, only releasing the engine for starting when pressed.

Two-pole electrical switch that allows full isolation regardless of the position of the plug in the outlet.

Ergonomic handle for greater operator comfort, foldable for easy transport and storage.

Lock for electrical extension.

High-density polyethylene wheels, covered with PVC.

2-pole, one-phase induction motors installed in a high-density polyethylene enclosure (for protection against electrical discharges).

Base: Made of 1.5-mm-thick steel sheet metal.

Blade: Made of special steel, 2.35 mm thick, fully tempered, secured to the motor through parts made of high-strength nylon, obtaining total isolation against electric shocks.

Cutting height adjustment: 5 positions, ranging from 2.5 to 7.3 cm (simultaneous height adjustment system on all 4 wheels).

Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.

Approximate yield: 500 m²/h.

Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).

DATA SHEET

Output (W): 1,300 / 1,800
Frequency (Hz): 50 / 60
Voltage (V): 127 or 220
Motor: One-phase
Net weight (kg): 21.535 / 19.595 / 19.105 / 21.995 / 21.635
Cutting range: 35cm
Bagger: With (18 liters)

DOWNLOAD THE MANUAL

KM-400

Onde comprar

FEATURES AND DIFFERENTIALS

Recommended for residential gardens of approximately 500 m².

Equipped with a safety lock button that prevents accidental machine starting, only releasing the engine for starting when pressed.

Two-pole electrical switch that allows full isolation regardless of the position of the plug in the outlet.

Ergonomic handle for greater operator comfort, foldable for easy transport and storage.

Lock for electrical extension.

High-density polyethylene wheels, covered with PVC.

2-pole, one-phase induction motors installed in a high-density polyethylene enclosure (for protection against electrical discharges).

Base: Made of 1.5-mm-thick steel sheet metal.

Blade: Made of special steel, 2.35 mm thick, fully tempered, secured to the motor through parts made of high-strength nylon, obtaining total isolation against electric shocks.

Cutting height adjustment: 5 positions, ranging from 2.5 to 7.3 cm (simultaneous height adjustment system on all 4 wheels).

Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.

Approximate yield: 500 m²/h.

Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).

FICHA TÉCNICA

Potência (W): 1.300 / 1.800
Frequência (Hz): 50 / 60
Tensão (V): 127 ou 220
Motor: Mono
Peso líquido (Kg): 21,535 / 19,595 / 19,105 / 21,995 / 21,635
Faixa de corte: 35 cm
Recolhedor: Com (18 litros)

You may also need

ES-550G

Eisiling machine chopper

Read More

ES-550

Eisiling machine chopper

Read More