LF-80G


FEATURES AND DIFFERENTIALS

Recommended for medium and large areas of approximately 800 m².

Using gas-powered lawn mowers makes mowing the lawn more convenient, without the hassle of extension cords and electrical outlets.

Equipped with manual choke and fuel valve to make it easier to start the motor.

It has a plug to facilitate draining oil from the crankcase.

Restricted for use in hilly terrain (15° maximum slope).

Ergonomic handle for greater operator comfort, foldable for easy transport and storage.

Base made of 1.9-mm-thick steel sheet metal.

High-density polyethylene wheels, covered with PVC tires.

Equipped with TRAPP motor (Lifan), powered by regular gas (without additives).

Fuel consumption: Approximately 1 l/h.

Lubricant: SAE 20W50 Oil – First change after the first 5 hours of operation and every 50 operating hours thereafter.

Air filter: Clean every 25 operating hours or annually.

Replace every 50 hours or annually.

Blade: Made of special 3-mm-thick steel, with induction tempering of the cutting edge.

Cutting height adjustment: 5 positions, ranging from 2.5 to 7 cm (individual height adjustment system on all 4 wheels).

Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.

Approximate yield: 800 m²/h.

Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).

DATA SHEET

Output (hp): 3.5
Motor: 4 strokes
Net weight (kg): 28.40
Comb. tank cap.: 0.8 liters
Crankcase oil cap.: 0.45 liters
Cutting range: 48cm
Bagger: Side outlet

DOWNLOAD THE MANUAL

LF-80G

Onde comprar

FEATURES AND DIFFERENTIALS

Recommended for medium and large areas of approximately 800 m².

Using gas-powered lawn mowers makes mowing the lawn more convenient, without the hassle of extension cords and electrical outlets.

Equipped with manual choke and fuel valve to make it easier to start the motor.

It has a plug to facilitate draining oil from the crankcase.

Restricted for use in hilly terrain (15° maximum slope).

Ergonomic handle for greater operator comfort, foldable for easy transport and storage.

Base made of 1.9-mm-thick steel sheet metal.

High-density polyethylene wheels, covered with PVC tires.

Equipped with TRAPP motor (Lifan), powered by regular gas (without additives).

Fuel consumption: Approximately 1 l/h.

Lubricant: SAE 20W50 Oil – First change after the first 5 hours of operation and every 50 operating hours thereafter.

Air filter: Clean every 25 operating hours or annually.

Replace every 50 hours or annually.

Blade: Made of special 3-mm-thick steel, with induction tempering of the cutting edge.

Cutting height adjustment: 5 positions, ranging from 2.5 to 7 cm (individual height adjustment system on all 4 wheels).

Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.

Approximate yield: 800 m²/h.

Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).

FICHA TÉCNICA

Potência (hp): 3,5
Motor: 4 tempos
Peso líquido (kg): 28,40
Cap. tanque comb.: 0,8 litro
Cap. óleo cárter: 0,45 litro
Faixa de corte: 48 cm
Recolhedor: Saída lateral

 

You may also need

ES-550G

Eisiling machine chopper

Read More

ES-550

Eisiling machine chopper

Read More