RC-51E
FEATURES AND DIFFERENTIALS
Recommended for residential gardens, parks, soccer fields or areas of approximately 1,000 m².
The size of the rear wheels facilitates the mobility of mowers on any type of terrain.
Equipped with a safety lock button that prevents accidental machine starting, only releasing the engine for starting when pressed.
Two-pole switch, allowing full isolation regardless of the position of the plug in the outlet.
Ergonomic handle for greater operator comfort, foldable for easy transport and storage.
Lock for electrical extension.
Wheels: Made of thermoplastic with sintered bushing.
Size of wheels: RC-51E – Front – 203 mm.
Rear – 305 mm.
2-pole, one-phase induction motors installed in a high-density polyethylene enclosure (for protection against electrical discharges).
Base: Made of 1.9-mm-thick steel sheet metal.
Blade: Made of special 3-mm-thick steel, with induction tempering of the cutting edge.
Cutting height adjustment: 9 positions, ranging from 2.8 to 8.8 cm (individual height adjustment system on all 4 wheels).
Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.
Approximate yield: 1,000 m²/h.
Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).
Output (W): 2,500
Frequency (Hz): 50 and 60
Voltage (V): 127 or 220
Motor: One-phase
Net weight (kg): 37.68 / 35.516 / 34.706
Cutting range: 51cm
Bagger: Recycler
RC-51E
FEATURES AND DIFFERENTIALS
Recommended for residential gardens, parks, soccer fields or areas of approximately 1,000 m².
The size of the rear wheels facilitates the mobility of mowers on any type of terrain.
Equipped with a safety lock button that prevents accidental machine starting, only releasing the engine for starting when pressed.
Two-pole switch, allowing full isolation regardless of the position of the plug in the outlet.
Ergonomic handle for greater operator comfort, foldable for easy transport and storage.
Lock for electrical extension.
Wheels: Made of thermoplastic with sintered bushing.
Size of wheels: RC-51E – Front – 203 mm.
Rear – 305 mm.
2-pole, one-phase induction motors installed in a high-density polyethylene enclosure (for protection against electrical discharges).
Base: Made of 1.9-mm-thick steel sheet metal.
Blade: Made of special 3-mm-thick steel, with induction tempering of the cutting edge.
Cutting height adjustment: 9 positions, ranging from 2.8 to 8.8 cm (individual height adjustment system on all 4 wheels).
Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.
Approximate yield: 1,000 m²/h.
Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).
FICHA TÉCNICA
Potência (W): 2.500
Frequência (Hz): 50 e 60
Tensão (V): 127 ou 220
Motor: Mono
Peso líquido (Kg): 37,680 / 35,516 / 34,706
Faixa de corte: 51 cm
Recolhedor: Recicladora