TS-70S

Electric Lawn Mower


FEATURES AND DIFFERENTIALS

Recommended for residential gardens of approximately 400 m².

Equipped with a safety lock button that prevents accidental machine starting, only releasing the engine for starting when pressed.

Two-pole switch, allowing full isolation regardless of the position of the plug in the outlet.

Ergonomic handle for greater operator comfort, foldable for easy transport and storage.

Lock for electrical extension.

Wheels: Made of high-density polyethylene.

2-pole, one-phase induction motors installed in a high-density polyethylene enclosure (for protection against electrical discharges).

Base: Made of 1.5-mm-thick steel sheet metal.

Blade: Made of special 2.35-mm-thick steel, fully tempered.

Cutting height adjustment: 3 positions, ranging from 3 to 6 cm (height adjustment system per axle, on the 2 front wheels and 2 rear wheels).

Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.

Approximate yield: 400 m²/h.

Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).

DATA SHEET

Output (W): 1,300
Frequency (Hz): 50
Voltage (V): 127 or 220
Motor: One-phase
Net weight (kg): 16.945
Cutting range: 30cm
Bagger: Recycler

TS-70S

Cortador de Grama Elétrico

Onde comprar

FEATURES AND DIFFERENTIALS

Recommended for residential gardens of approximately 400 m².

Equipped with a safety lock button that prevents accidental machine starting, only releasing the engine for starting when pressed.

Two-pole switch, allowing full isolation regardless of the position of the plug in the outlet.

Ergonomic handle for greater operator comfort, foldable for easy transport and storage.

Lock for electrical extension.

Wheels: Made of high-density polyethylene.

2-pole, one-phase induction motors installed in a high-density polyethylene enclosure (for protection against electrical discharges).

Base: Made of 1.5-mm-thick steel sheet metal.

Blade: Made of special 2.35-mm-thick steel, fully tempered.

Cutting height adjustment: 3 positions, ranging from 3 to 6 cm (height adjustment system per axle, on the 2 front wheels and 2 rear wheels).

Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.

Approximate yield: 400 m²/h.

Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).

FICHA TÉCNICA

Potência (W): 1.300
Frequência (Hz): 50
Tensão (V): 127 ou 220
Motor: Mono
Peso líquido (Kg): 16,945
Faixa de corte: 30 cm
Recolhedor: Recicladora

Check out other models

TR-2000

Branch and Waste Shredder

See the product

TR-1500

Branch and Waste Shredder

See the product