Produtos - Trapp

ES-550G

mktgeral_trapp — Mon, 13 Jun 2022 11:28:17 +0000

Equipped with TRAPP motors (Lifan), powered by regular gas (without additives).
Lubricant: SAE 20W50 Oil – First change after the first 5 hours of operation and every 50 operating hours thereafter, with air filter maintenance.
Cutting size: 4, 6, 8 and 12mm.
Cutting length adjustment ratio: Adjust the belt to the appropriate position for the desired cutting length.
Body built of 6.35-mm-thick sheet metal.
Gearbox lubrication: First change after the first 50 hours of operation and every 300 hours thereafter. Use 700 ml of SAE 140 oil.
Ration outlet device with jet direction adjustment and 360° rotation.
Finish: Anti-corrosion treatment on all parts subject to oxidation and painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.
Warranty: 24 months (3 months legal warranty, 9 months special TRAPP warranty, 12 subsequent months – excluding the motor – special TRAPP warranty).

Application
Cutting grass, sorghum, sugarcane, and shredding palm fronds, coconut palm leaves, fibrous materials, among others, for cattle, horses, boars, emus, ostriches, at the right size for each type of herd, in uniform pieces.

The post ES-550G appeared first on Trapp.

ES-550

mktgeral_trapp — Mon, 13 Jun 2022 11:21:40 +0000

Cutting size: 4, 6, 8 and 12mm.
Cutting length adjustment ratio: Adjust the belt to the appropriate position for the desired cutting length.
Body built of 6.35-mm-thick sheet metal.
Gearbox lubrication: First change after the first 50 hours of operation and every 300 hours thereafter. Use 700 ml of SAE 140 oil.
Ration outlet device with jet direction adjustment and 360° rotation.
Finish: Anti-corrosion treatment on all parts subject to oxidation and painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.
Warranty: 24 months (3 months legal warranty, 9 months special TRAPP warranty, 12 subsequent months – excluding the motor – special TRAPP warranty).

Application
Cutting grass, sorghum, sugarcane, among others, for cattle, boars, emus, ostriches, at the right size for each type of herd, in uniform pieces. In addition to shredding palm fronds, coconut palm leaves and fibrous materials.

The post ES-550 appeared first on Trapp.

ES-650

mktgeral_trapp — Fri, 10 Jun 2022 19:44:31 +0000

Cutting size: 5 and 10 mm.
Cutting length adjustment ratio: Adjust the belt to the appropriate position for the desired cutting length.
Body built of 6.35-mm-thick sheet metal.
Ration outlet device with jet direction adjustment and 360° rotation.
Gearbox lubrication: First change after the first 50 hours of operation and every 300 hours thereafter. Use 700 ml of SAE 140 oil.
Finish: Anti-corrosion treatment on all parts subject to oxidation and painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.
Warranty: 24 months (3 months legal warranty, 9 months special TRAPP warranty, 12 subsequent months – excluding the motor – special TRAPP warranty).

The post ES-650 appeared first on Trapp.

ES-650G

mktgeral_trapp — Fri, 10 Jun 2022 19:35:08 +0000

Equipped with TRAPP motors (Lifan), powered by regular gas (without additives).
Lubricant: SAE 20W50 Oil – First change after the first 5 hours of operation and every 50 operating hours thereafter, with air filter maintenance.
Cutting size: 5 and 10 mm.
Cutting length adjustment ratio: Adjust the belt to the appropriate position for the desired cutting length.
Body built of 6.35-mm-thick sheet metal.
Gearbox lubrication: First change after the first 50 hours of operation and every 300 hours thereafter. Use 700 ml of SAE 140 oil.
Ration outlet device with jet direction adjustment and 360° rotation.
Finish: Anti-corrosion treatment on all parts subject to oxidation and painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.
Warranty: 24 months (3 months legal warranty, 9 months special TRAPP warranty, 12 subsequent months – excluding the motor – special TRAPP warranty).

The post ES-650G appeared first on Trapp.

TR-2000

Kauane — Mon, 09 May 2022 12:17:42 +0000

It has a trailer certified by Inmetro and approved by Detran, with appropriate signaling, LED bulbs and a spare tire.
Trailer with hitch for towing with brake and hitch lock.
Parking brake and stabilizing shoes.
Suspension with individual torsion axle and inertia brake, which works synchronously with the vehicle.
The cutting system is connected by pulleys and belts through the manually operated clutch.
Motor panel with electric start key, indication of hours worked, temperature gauge, oil pressure and battery light.
54 HP, 4-cylinder, 2600-cylinder stationary diesel engine.

Warranty:
6 months (3 months legal warranty, 3 months special TRAPP warranty).

Application:
Wood measuring up to 20 cm in diameter can be shredded and turned into rich soil nutrients, garden bed mulch or boiler fuel.

DOWNLOAD THE MANUAL

The post TR-2000 appeared first on Trapp.

TR-1500

Kauane — Mon, 09 May 2022 10:49:21 +0000

Driven by a PTO with 65-hp minimum output.
Hitch for 3-point universal system for category II tractors.
Gearbox with a 6-spline shaft for power take-off, increasing the performance of the cutting assembly.
Reinforced supporting base, ensuring more stability during operation.
Can be transported suspended by a tractor.

Application:
Wood measuring up to 20 cm in diameter can be shredded and turned into rich soil nutrients, garden bed mulch or boiler fuel.

DOWNLOAD THE MANUAL

The post TR-1500 appeared first on Trapp.

LF 65S

Bruno — Fri, 06 May 2022 04:19:04 +0000

Recommended for medium and large areas of approximately 1,000 m².

Using gas-powered lawn mowers makes mowing the lawn more convenient, without the hassle of extension cords and electrical outlets.

Equipped with an automatic brake system for greater safety, induction ignition, manual retractable starter with decompressor, automatic speed control and low noise index.

The size of the rear wheels facilitates the mower’s mobility on any type of terrain.

Drive system:

Equipped with an exclusive traction system on the front wheels, helping to move and drive the mower forward at a speed of 4.2 km/h. Thermoplastic wheels with sintered bushings.

Size of wheels: front: 203 mm (8”), rear: 305 mm (12”).

Restricted for use in hilly terrain (maximum slope of 15°) and eventual maneuvers up to 30°.

Ergonomic handle for greater operator comfort, foldable for easy transport and storage.

Base made of 1.9-mm-thick steel sheet metal.

Equipped with TRAPP motor (Lifan), powered by regular gasoline (without additives).

Fuel consumption: approximately 1 l/h. Lubricant: SAE 20W50 Oil – First change after the first 5 hours of operation and every 50 operating hours thereafter.

Air filter: Clean every 25 operating hours or annually.

Replace every 50 hours or annually.

Special steel blade, 3 mm thick, with induction tempering on the cutting edge.

9 cutting height adjustment positions, ranging from 2.8 to 8.9 cm (individual height adjustment system on all 4 wheels).

Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.

Approximate yield: 1,000 m²/h.

Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).

The post LF 65S appeared first on Trapp.

LF 55RC

Bruno — Fri, 06 May 2022 04:16:11 +0000

Recommended for medium and large areas of approximately 1,000 m².

Using gas-powered lawn mowers makes mowing the lawn more convenient, without the hassle of extension cords and electrical outlets.

Equipped with an automatic brake system for greater safety, induction ignition, manual retractable starter with decompressor, automatic speed control and low noise index.

The size of the rear wheels facilitates the mower’s mobility on any type of terrain.

Drive system:

Equipped with an exclusive traction system on the front wheels, helping to move and drive the mower forward at a speed of 4.2 km/h. Thermoplastic wheels with sintered bushings.

Size of wheels: front: 203 mm (8”), rear: 305 mm (12”).

Restricted for use in hilly terrain (maximum slope of 15°) and eventual maneuvers up to 30°.

Ergonomic handle for greater operator comfort, foldable for easy transport and storage.

Base made of 1.9-mm-thick steel sheet metal.

Equipped with TRAPP motor (Lifan), powered by regular gasoline (without additives).

Fuel consumption: approximately 1 l/h. Lubricant: SAE 20W50 Oil – First change after the first 5 hours of operation and every 50 operating hours thereafter.

Air filter: Clean every 25 operating hours or annually.

Replace every 50 hours or annually.

Special steel blade, 3 mm thick, with induction tempering on the cutting edge.

9 cutting height adjustment positions, ranging from 2.8 to 8.9 cm (individual height adjustment system on all 4 wheels).

Finish:

All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.

Approximate yield: 1,000 m²/h.

Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).

Transmission housing – 6 months (3 months legal warranty, 3 months special TRAPP warranty).

The post LF 55RC appeared first on Trapp.

LF 65WT

Bruno — Fri, 06 May 2022 04:09:47 +0000

Recommended for medium and large areas of approximately 1,000 m².

Using gas-powered lawn mowers makes mowing the lawn more convenient, without the hassle of extension cords and electrical outlets.

Equipped with an automatic brake system for greater safety, induction ignition, manual retractable starter with decompressor, automatic speed control and low noise index.

The size of the rear wheels facilitates the mobility of mowers on any type of terrain.

Thermoplastic wheels with sintered bushing.

Size of wheels: front: 203 mm (8”), rear: 305 mm (12”).

Restricted for use in hilly terrain (maximum slope of 15°) and eventual maneuvers up to 30° for 6.5-hp motors.

Ergonomic handle for greater operator comfort, foldable for easy transport and storage.

Base made of 1.9-mm-thick steel sheet metal.

Equipped with TRAPP motor (Lifan), powered by regular gasoline (without additives).

Fuel consumption: approximately 1 l/h.

Lubricant: SAE 20W50 Oil – First change after the first 5 hours of operation and every 50 operating hours thereafter.

Air filter: Clean every 25 operating hours or annually.

Replace every 50 hours or annually.

Special steel blade, 3 mm thick, with induction tempering on the cutting edge.

9 cutting height adjustment positions, ranging from 2.8 to 8.9 cm (individual height adjustment system on all 4 wheels).

Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.

Approximate yield: 1,000 m²/h.

Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).

The post LF 65WT appeared first on Trapp.

SX LK16C

Beatriz — Tue, 03 May 2022 11:19:19 +0000

High-strength plastic body.
Lever-actuated system with reversal, for right-handed and left-handed use.
Actuating trigger with lock.
Safety valve.
Spraying boom.
Adjustable carrying handle with lock for greater comfort.
Four different types of nozzles included: fan, cone, double cone and shower, as well as a set of accessories for assembly and maintenance.

Application:
Spraying chemical compounds, fumigation with insecticides, fungicides, pesticides; irrigating plants and other purposes such as sanitizing and cleaning.

DOWNLOAD THE MANUAL

The post SX LK16C appeared first on Trapp.