RM-70E


FEATURES AND DIFFERENTIALS

Recommended for residential gardens, parks, soccer fields or areas of approximately 800 m².

Equipped with a safety lock button that prevents accidental machine starting, only releasing the engine for starting when pressed.

Two-pole switch, allowing full isolation regardless of the position of the plug in the outlet.

The size of the rear wheels facilitates the mobility of mowers on any type of terrain.

Ergonomic handle for greater operator comfort, foldable for easy transport and storage.

Lock for electrical extension.

Thermoplastic wheels with sintered bushing.

2-pole, one-phase induction motors installed in a high-density polyethylene enclosure (for protection against electrical discharges).

Size of wheels: Front – 203 mm.

Rear – 305 mm

Base: Made of 1.9-mm-thick steel sheet metal.

Blade: Made of special 3-mm-thick steel, with induction tempering of the cutting edge.

Cutting height adjustment: 9 positions, ranging from 3.4 to 9.5 cm (individual height adjustment system on all 4 wheels).

Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.

Approximate yield: 800 m²/h.

Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).

DATA SHEET

Output (W): 2,500
Frequency (Hz): 50 and 60
Voltage (V): 127 or 220
Motor: One-phase
Net weight (kg): 33.467 / 32.122 / 31.852
Cutting range: 48cm
Bagger: Side outlet

RM-70E

Onde comprar

FEATURES AND DIFFERENTIALS

Recommended for residential gardens, parks, soccer fields or areas of approximately 800 m².

Equipped with a safety lock button that prevents accidental machine starting, only releasing the engine for starting when pressed.

Two-pole switch, allowing full isolation regardless of the position of the plug in the outlet.

The size of the rear wheels facilitates the mobility of mowers on any type of terrain.

Ergonomic handle for greater operator comfort, foldable for easy transport and storage.

Lock for electrical extension.

Thermoplastic wheels with sintered bushing.

2-pole, one-phase induction motors installed in a high-density polyethylene enclosure (for protection against electrical discharges).

Size of wheels: Front – 203 mm.

Rear – 305 mm

Base: Made of 1.9-mm-thick steel sheet metal.

Blade: Made of special 3-mm-thick steel, with induction tempering of the cutting edge.

Cutting height adjustment: 9 positions, ranging from 3.4 to 9.5 cm (individual height adjustment system on all 4 wheels).

Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.

Approximate yield: 800 m²/h.

Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).

FICHA TÉCNICA

Potência (W): 2.500
Frequência (Hz): 50 e 60
Tensão (V): 127 ou 220
Motor: Mono
Peso líquido (Kg): 33,467 / 32,122 / 31,852
Faixa de corte: 48 cm
Recolhedor: Saída lateral

 

Check out other models

TR-2000

Branch and Waste Shredder

See the product

TR-1500

Branch and Waste Shredder

See the product