SL-30S
FEATURES AND DIFFERENTIALS
Recommended for residential gardens of approximately 400 m².
Equipped with a safety lock button that prevents accidental machine starting, only releasing the engine for starting when pressed.
Two-pole electrical switch that allows full isolation regardless of the position of the plug in the outlet.
Ergonomic handle for greater operator comfort, foldable for easy transport and storage.
Lock for electrical extension.
High-density polyethylene wheels.
2-pole, one-phase induction motors installed in a high-density polyethylene enclosure (for protection against electrical discharges).
Base: Made of 1.5-mm-thick steel sheet metal.
Blade: Made of special steel, 1.7 mm thick, fully tempered, secured to the motor through parts made of high-strength nylon, obtaining total isolation against electric shocks.
3 positions, ranging from 3 to 6 cm (height adjustment system per axle, on the 2 front wheels and 2 rear wheels).
Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.
Approximate yield: 400 m²/h.
Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).
Output (W): 1,100/1,300
Frequency (Hz): 50
Voltage (V): 127 or 220
Motor: One-phase
Net weight (kg): 15.5 / 15.755
Cutting range: 30cm
Bagger: Side outlet
SL-30S
FEATURES AND DIFFERENTIALS
Recommended for residential gardens of approximately 400 m².
Equipped with a safety lock button that prevents accidental machine starting, only releasing the engine for starting when pressed.
Two-pole electrical switch that allows full isolation regardless of the position of the plug in the outlet.
Ergonomic handle for greater operator comfort, foldable for easy transport and storage.
Lock for electrical extension.
High-density polyethylene wheels.
2-pole, one-phase induction motors installed in a high-density polyethylene enclosure (for protection against electrical discharges).
Base: Made of 1.5-mm-thick steel sheet metal.
Blade: Made of special steel, 1.7 mm thick, fully tempered, secured to the motor through parts made of high-strength nylon, obtaining total isolation against electric shocks.
3 positions, ranging from 3 to 6 cm (height adjustment system per axle, on the 2 front wheels and 2 rear wheels).
Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.
Approximate yield: 400 m²/h.
Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).
FICHA TÉCNICA
Potência (W): 1.100/1.300
Frequência (Hz): 50
Tensão (V): 127 ou 220
Motor: Mono
Peso líquido (Kg): 15, 500 / 15,755
Faixa de corte: 30 cm
Recolhedor: Saída lateral