Português
EspañolSL-30T
FEATURES AND DIFFERENTIALS
Two-pole electrical switch that allows full isolation regardless of the position of the plug in the outlet.
Ergonomic handle for greater operator comfort, foldable for easy transport and storage.
Lock for electrical extension. Wheels made of high-density polyethylene.
2-pole, one-phase induction motors installed in a high-density polyethylene enclosure (for protection against electrical discharges).
Base: Made of 1.5-mm-thick steel sheet metal.
Blade: Made of special steel, 1.7 mm thick, fully tempered, secured to the motor through parts made of high-strength nylon, obtaining total isolation against electric shocks. 3 positions, ranging from 3 to 6 cm (height adjustment system per axle, on the 2 front wheels and 2 rear wheels).
Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.
Approximate yield: 400 m2/h.
Motor: One-phase
Output (W): 1,100 / 1,300
Net Weight (kg): 15.335 / 13.255 / 13.265 / 15.5
Cutting range: 30cm
Bagger: Side outlet
Voltage (V): 127 or 220 Frequency
(Hz): 50 / 60
DOWNLOAD THE MANUAL
SL-30T
FEATURES AND DIFFERENTIALS
Two-pole electrical switch that allows full isolation regardless of the position of the plug in the outlet.
Ergonomic handle for greater operator comfort, foldable for easy transport and storage.
Lock for electrical extension. Wheels made of high-density polyethylene.
2-pole, one-phase induction motors installed in a high-density polyethylene enclosure (for protection against electrical discharges).
Base: Made of 1.5-mm-thick steel sheet metal.
Blade: Made of special steel, 1.7 mm thick, fully tempered, secured to the motor through parts made of high-strength nylon, obtaining total isolation against electric shocks. 3 positions, ranging from 3 to 6 cm (height adjustment system per axle, on the 2 front wheels and 2 rear wheels).
Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.
Approximate yield: 400 m2/h.
FICHA TÉCNICA
Motor: Mono
Potência(W):1.100 / 1.300
Peso líquido(Kg):15,335 / 13,255 / 13,265 / 15,500
Faixa de corte: 30 cm
Recolhedor: Saída lateral
Tensão(V): 127 ou 220 Frequência
(Hz): 50 / 60
