TS-70T
FEATURES AND DIFFERENTIALS
Recommended for residential gardens of approximately 400 m².
Equipped with a safety lock button that prevents accidental machine starting, only releasing the engine for starting when pressed.
Two-pole switch, allowing full isolation regardless of the position of the plug in the outlet.
Ergonomic handle for greater operator comfort, foldable for easy transport and storage.
Lock for electrical extension.
Wheels: Made of high-density polyethylene.
2-pole, one-phase induction motors installed in a high-density polyethylene enclosure (for protection against electrical discharges).
Base: Made of 1.5-mm-thick steel sheet metal.
Blade: Made of special 2.35-mm-thick steel, fully tempered.
Cutting height adjustment: 3 positions, ranging from 3 to 6 cm (height adjustment system per axle, on the 2 front wheels and 2 rear wheels).
Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.
Approximate yield: 400 m²/h.
Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).
Output (W): 1,800
Frequency (Hz): 60
Voltage (V): 127 or 220
Motor: One-phase
Net weight (kg): 21.75 / 21.45
Cutting range: 40cm
Bagger: Side outlet
DOWNLOAD THE MANUAL
TS-70T
FEATURES AND DIFFERENTIALS
Recommended for residential gardens of approximately 400 m².
Equipped with a safety lock button that prevents accidental machine starting, only releasing the engine for starting when pressed.
Two-pole switch, allowing full isolation regardless of the position of the plug in the outlet.
Ergonomic handle for greater operator comfort, foldable for easy transport and storage.
Lock for electrical extension.
Wheels: Made of high-density polyethylene.
2-pole, one-phase induction motors installed in a high-density polyethylene enclosure (for protection against electrical discharges).
Base: Made of 1.5-mm-thick steel sheet metal.
Blade: Made of special 2.35-mm-thick steel, fully tempered.
Cutting height adjustment: 3 positions, ranging from 3 to 6 cm (height adjustment system per axle, on the 2 front wheels and 2 rear wheels).
Finish: All metal parts receive anti-corrosion treatment and are painted with polyester powder coating polymerized in a 220°C furnace, ensuring a longer lasting finish.
Approximate yield: 400 m²/h.
Warranty: 12 months (3 months legal warranty, 9 months special TRAPP warranty).
FICHA TÉCNICA
Potência (W): 1.100
Frequência (Hz): 50 e 60
Tensão (V): 127 ou 220
Motor: Mono
Peso líquido (Kg): 14,400 / 13,065 / 13,035
Faixa de corte: 30 cm
Recolhedor: Recicladora